Massivit: Larger than life – Greek statue of God-3d printing application

The low cost of materials and extremely high speed of theassivit 1800 3D printer is inspiring it’s distributors to  experiment with its capabilities.    Since the system is targeted  primarily at the visual marketing industry, many of its current  customers and resellers are used to larger than life prints.Except now they are larger than life 3D prints and what better subject than a Greek god to demonstrate it?


 The Greek model was printed in sections comprising of legs,torso, head, hands, robe edge and shield. This allowed more  structureless printing, which is quicker, easier to handle and  finish. The largest single component on this model being  1,600 mm/5.2 ft. tall. The team sprayed on three coats of car filler with a spray gun to   smooth out the layers that make up the structure sanding between coats. A steel base was created to support the model, attaching two L shaped steel beams as the central support structure. The 1st runs from the model’s foot to shoulder and the 2nd runs from the other foot to waist height. These beams were bolted to the base so that they could later be unbolted for  transport. The legs of the model were filled with a measurable amount of  polyurethane expanding foam, as heat is generated and   expanding forces are applied within the shell of the model. The mixture foams up inside the model, providing added strength  and bonding the model shell to the internal posts. The waist and torso base were joined with a two-part superglue. Any remaining gaps were filled with Dimengel and continued filling with polyurethane for added strength. The hands, robe and  head were carried out in the same manner. Once all joins were completed an undercoat was applied in order to check for imperfections, which were then sanded and refilled. For completion of the model, two coats of a textured spray paint were applied to give the model its final, highly realistic, stone appearance. The finished statue has a total height of 3,400 mm/11.1 ft. and was exhibited alongside the Massivit 3D printer at a show in the Netherlands